Start with your discipline, current skills and coach’s advice, then discuss a compatible blade with your fitter. Model features, blade length and sharpening preference are separate parts of the conversation. A familiar name alone does not settle the choice.
Compare the features that explain the recommendation
Manufacturer model pages are useful when you know what question you are asking. John Wilson’s Coronation Ace page is one example of a named blade specification. Bring a proposed model to your appointment, then ask which of its features are relevant to your skating instead of relying on its popularity.
Sources: John Wilson — Coronation Ace ↗
Confirm the length for the actual boot
Edea explains that blade length is connected to boot size and the intended alignment of the skater over the blade. Its boot construction can call for a different blade length from a traditional boot. Do not carry a previous blade length into a new boot purchase without a compatibility check.
Sources: Edea — Blade mounting ↗
Keep model choice separate from sharpening
The radius of hollow is the groove ground between the blade’s two edges during sharpening. SKATING magazine explains that this can be selected and recorded as part of a sharpening history. Ask about the blade model first, then discuss the sharpening preference with the technician.
Agree on the setup before buying
A useful order of decisions is to discuss the boot fit, confirm a suitable blade and length, and then agree on mounting and sharpening. Ask which work the shop can undertake on the equipment you plan to purchase.
If reusing a blade, bring it for assessment. Ask whether its length, condition and remaining usable life make it a sensible part of the new setup. There is no need to decide that from a photograph or a model name.
TAKE THIS TO YOUR NEXT APPOINTMENT
Three useful questions
- What does this blade offer for my discipline and current skating?
- Which blade length fits this exact boot and size?
- Can my existing blade be assessed before I decide to replace it?
READ THE PRIMARY MATERIAL
Sources & editorial note
- John Wilson — Coronation Ace
One manufacturer’s model page, useful for comparing named blade features.
- Edea — Blade mounting
Manufacturer guidance on blade length, alignment and boot-specific mounting hardware.
- SKATING magazine — What is a radius of hollow?
Patti Larkin’s February 2023 equipment column, published by U.S. Figure Skating.
Original research and writing by Proton Forest for an independent portfolio concept. This guide was not authored or reviewed by Mike Fearon. Manufacturer instructions can differ by model; discuss your actual equipment with your fitter and coach.