Skip to content
Figure skate fitting & sharpening by appointment only(734) 525-1704
PODIUMSKATESFIGURE SKATING SPECIALISTSArrange a visit

THE SKATE NOTEBOOK / Fitting

Stock, shaped or custom: three different boot conversations

THE USEFUL STARTING POINT

A stock boot, a professionally shaped stock boot and a boot made to custom measurements are different options. Begin with the actual fit problem and the construction of the proposed boot. ‘Custom’ alone does not explain what work will be done.

01

Start by understanding the stock fit

Stock boots come in defined models, sizes and available widths. In its Edea fitting guidance, Skates U.S. distinguishes heel fit from the width and shape at the front of the foot. The starting boot still matters even when later shaping is possible.

Sources: Skates U.S. — Fitting and custom shaping Edea skates ↗

02

Shaping changes a suitable boot in specific areas

Edea’s Instant Custom Fit guidance describes local adjustments to compatible models using a trained technician. It explicitly distinguishes this from a custom-made boot. It also says the work should be left to technicians, rather than attempted by heating the boot at home.

Ask which area is being adjusted, why the proposed model is a suitable starting point and how the fit will be checked afterward. Do not assume every boot in a brand’s range can receive the same treatment.

Sources: Edea — Instant Custom Fit ↗

03

Clarify what a custom order changes

If a custom-made option is being discussed, ask what measurements and design choices are part of the order. Write down what is being changed and what still follows the manufacturer’s normal model specification. Confirm the expected process, cost and timing with the shop.

These are practical purchasing questions, not a ranking of stock against custom. The point is to understand the proposed solution to your particular fit.

04

Make follow-up part of the decision

A useful comparison includes the fitting and adjustment plan, rather than only the purchase price. Ask who handles a concern after the first skating sessions and what information they would like you to bring back.

Keep the boot model, width, size and any agreed adjustments together in your equipment notes. That record will make the next conversation more precise.

TAKE THIS TO YOUR NEXT APPOINTMENT

Three useful questions

  1. Is this a stock size, a shaped stock boot or a custom-made order?
  2. Which specific fit concern is the proposed work intended to address?
  3. What is the plan if I need a follow-up adjustment?
Explore boot fitting at Podium

READ THE PRIMARY MATERIAL

Sources & editorial note

Original research and writing by Proton Forest for an independent portfolio concept. This guide was not authored or reviewed by Mike Fearon. Manufacturer instructions can differ by model; discuss your actual equipment with your fitter and coach.

All eight skater guides

Your skates deserve a conversation

LET’S FIND YOUR
NEXT EDGE.

Fittings and sharpening are by appointment only.
Call the shop to discuss your skates and arrange a time.

(734) 525-1704Plan your visit